Detailed Product Description

Features and benefits:
An exceptionally formulated high strength one-component based coating
material which can be applied on exterior wall surface before painting.
Easy to spread, anti-crack, damp-proof, easy sanding and alkali-resistant.

Surface preparation:
The surface must be free from any contaminants such as oil and grease.
Cement mortar must be allowed to cure for at least 14 days. If the surface
is too dry, damp with water before coating.

Application:
1) Putty powder: water=25kg: 9-10kg
2) According to the proportion of water and powder, firstly pour the rinsing
into the mixing barrel, add powder then, stirring with an electrical mixer
into lump-free mixture; restring after stand for 5~10 minutes, so as to
achieve the optional effect
3) Apply the first layer with a correct trowel and spread evenly on the wall.
Allow the first layer to dry for at least 4 hours, the second coat is followed.
The total thickness should be at least 1mm

Dosage:
Approx. 1.5-2kg/m.m (depending on substrate condition)

Technical parameters:
1) Appearance: grey or white powder
2) Workability: good
3) Drying time: approx. 3hr
4) Water resistance (48 hr): excellent
5) Resistance to alkali (24hr): excellent
6) Bonding strength: >0.70MPa
7) After water immersion: >0.50MPa

Precautions:
1) Do not mix the cured adhesive with water and reuse it.
2) Do not use the product with the temperature above 40^oC
or below 5^oC
3) The mixture should be used up within 3 hours in summer and 5 hours in winter
4) Sanding should be done within 48 hours

Shelf life: unopened bags can be stored for up to 12 months in a cool dry environment

Packing:
20kg/bag