Detailed Product Description

Features and benefits:
1) An exceptionally formulated high strength two-component based coating
materials for existing exterior wall surface before painting
2) Easy to spread
3) Anti-crack
4) Easy sanding and alkali-resistant
5) Suitable for the surface renew

Surface preparation:
The surface must be free from any contaminants such as oil, grease, cement mortar
must be allowed to cure for at least 7 days. If the surface is too dry, damp with
water before coating.

Applications:
1) Mixing ratio: powder:additive:water = 20kg:2.5kg:5-7kg
2) According to the proportion of water and powder, firstly pour water
and additive into a clean container, add powder, stirring with an
electrical mixer into lump-free mixture; restirring after stand for 5-10
minutes, so as to achieve the optional effect
3) Applies the first layer with a trowel and spread evenly on the wall. Allow
the first layer to dry for at least 4 hours, the second coat is followed. The
total thickness of coating should be at least 1mm

Dosage:
Approx.: 1.5-2kg/m.m (depending on the substrate condition)

Technical parameters
1) Appearance: grey or white and liquid additive powder
2) Workability: good
3) Drying time: approx. 3h
4) Water resistance (48h): excellent
5) Resistance to alkali (24h): excellent
6) Bonding strength: >0.70MPa
7) After water immersion: >0.50MPa

Precautions:
1) Do not mix the cured adhesive with water and reuse it
2) The mixture should be used up within 5 hours
3) Do not use the product with the temperature above 40^oC
or below 5^oC
4) Avoid using the product during rainy days

Shelf life:
Saved in cool and dry pace, the temperature for the ingredient of the liquid cannot
be less than 5^oC; unopen products can be stored for one year

Packing:
20kg/bag + 2.5kg/pot